If you are installing an aluminum fence, you may be confused about what you should do to ensure you get the correct result. Below are a few tips to help you along.
Measure Properly
If you’re installing an aluminum fence, getting the correct measurements is essential. The wrong measure could lead to a costly fence project down the road.
Your local building code should be one of your top priorities. Different cities have different regulations, so you’ll need to check with your local engineer or architect to find out what they require.
You’ll also need to measure your property lines. It’s a good idea to mark your yard with a string line. This will help you keep your yard from looking too cluttered.
Another essential thing to consider is what material to use for your new aluminum fence. A high-quality fence for an aluminum fence installation houston tx can be a significant upgrade to your home. But make sure you get the materials you need for a reasonable price.
Patience is a Virtue
It may not seem easy to install an aluminum fence for beginners, but it can be a breeze with the right tools and research. In fact, the average project can take from 10-20 hours.
Choosing the size and design of your fence should be your first step. The material you choose should be durable, affordable, and match the color of your home.
Next, you need to dig holes. A 6” wide hole is typically enough, but you can go deeper if you prefer. Fence posts should be level, and you must ensure they are at least three to four inches below the grade. This will prevent your fence from bowing or sagging over time.
Once you’ve dug the holes, you can install the posts. If you need to be handier with a power drill, you can hire someone to do it for you. However, this will add $30 per linear foot to your total bill.
Review Your Plat Before Installing
Finding the precise location of your property lines should be one of your first priorities before giving your new aluminum fence the seal of approval. A little pre-planning can save you money, time and a host of headaches. Since you’re looking for a fence, you’ll want to separate the good from the bad. So what’s your best bet? Make a list of property owners and take notes if they need to be added. The more formal the process is, the better. And remember to get an up-to-date HOA or homeowner association (HAO) newsletter. Some homeowners associations don’t even care about the height of your new fence. If you want to buy or sell, it’s also a great time to shop around.
Determine The Number of Sections
If you want to install an aluminum fence, you need to know how to determine the number of sections. Fences come in several lengths, so choosing the correct size for your property is essential.
Consider your local building codes and zoning laws when determining how many sections you will need. You also need to find out if you need a permit. Some neighborhoods have stricter rules for fencing, so you may need to ask your local engineer or architect.
Once you have found the proper length for your fence, you will need to start planning for installation. You will need the right equipment, such as a posthole digger, to dig holes in the ground. Also, you will need to check with your local utility companies to avoid digging near their lines.
Consider Whether You Need a Permit
It’s always a good idea to check with your local building codes department to see what permits are required for your endeavor. They’ll have all the information you need to make your project successful.
The key is to find the permit that will allow you to install the fence of your dreams. If you need to be lucky enough to own property in an incorporated city, your best bet is to check with the county records office. That’s where you’ll also find the property surveys that you need to know about. You can even get the best of both worlds by using a local engineer to help you with your plans.
It’s a good idea to choose a durable and affordable material. Consider hiring a contractor to handle the installation. Elbow grease and some right tools can go a long way.